Why Lenze DC Drives current consumption of motor is too high?
The current consumption of the motor might be too high because: * The setting of C0016 is too high. Correct the setting. * The setting of C0015 is too low. Correct the setting. * C0084, C0087, C0088, C0089, C0090, C0091, and/or C0092 are not adapted to the motor data. Perform manual adaptation or identification of motor parameters (C0148).
How to fix Lenze DC Drives motor that does not rotate smoothly?
If the motor isn't rotating smoothly, here are a few things to check: * Defective motor cable. Check the motor cable. * Maximum current too low (C0022, C0023). Adapt to the application. * Motor underexcited or overexcited. Check the parameter setting (C0015, C0016, C0014). * C0084, C0087, C0088, C0089, C0090, C0091 and/or C0092 are not adapted to the motor data. Perform manual adaptation or identification of motor parameters (C0148).
What to do if Lenze DC Drives motor rotates, but setpoints are '0'?
If the motor rotates but the setpoints are '0', it might be because a setpoint has been selected using the keypad function. To resolve this, set the setpoint to '0' by configuring C0140 = 0.
To Next Page
General