Lenze E82EV152K4C User Manual

Glossary
Meaning of the signal names
2
Guide
2.2
2.2.2
L
2.2-7
EDS82EV903-1.0-11/2002
NSET1-JOG2/3/6/7
NSET1-activation of fixed frequency 2, 3, 6 or 7
Activates fixed setpoint (JOG) 2, 3, 6 or 7
NSET1-JOG4/5/6/7 NSET1-activation of fixed frequency 4, 5, 6 or 7
Activates fixed setpoint (JOG) 2, 3, 6 or 7
NSET1-N1 NSET1-speed setpoint 1
Main setpoint 1
NSET1-N2 NSET1-speed setpoint 2
Main setpoint 2
NSET1-NADD NSET1-ad ditional sp eed s etpoint
Additional setpoint via keypad or paramet e r channel (C0140)
NSET1-NOUT NSET1- speed output
Output of ramp function generator 1
NSET1-RFG1 NSET1-ramp function generator 1
Ramp function generator 1 for main setpoint
NSET1-RFG1-0 NSET1-ramp function generator 1 = 0
Ramp function generator input must be set to ”0” for mains
setpoint
NSET1-RFG1-I=O NSET1-ramp function generator 1 input=output
Status signal:
Ramp function generator, input = output
NSET1-RFG1-IN NSET1-ramp function generator 1 input
Signal at ramp function generator input
NSET1-RFG1-STOP NSET1 -ramp function generator 1 stop
Stop of ramp function generator for main setpoint
NSET1-TI1/3 NSET1-activation of timer 1 or 3
Activates additional acceleration time/deceleration time 1 or 3
NSET1-TI2/3 NSET1-activation of timer 2 or 3
Activates additional acceleration time/deceleration time 2 or 3
PCTRL1 Process control 1
Function block process controller 1
PCTRL1-INV-ON PCTRL1-inversion on
Process controller output inversion
PCTRL1-ACT PCTRL1-actual value
Actual process controller value
PCTRL1-FADING PCTRL1-fading
Fading in or fading out process controller output
PCTRL1-FOLL1 PCTRL1-f ollow1
Servo controller 1
PCTRL1-FOLL-OUT PCTRL1 -follow1 output
Servo controller output
PCTRL1-FOLL1-0 PCTRL1-f ollow1 = 0
Setting of servo controller to ”0”
PCTRL1-I-OFF PCTRL1 -integration off
Switches off I-component of the process controller
Show/Hide Bookmarks

Lenze E82EV152K4C Specifications

General

Brand	Lenze
Model	E82EV152K4C
Category	DC Drives
Language	English