During operation
6-1
SHB9300CRV EN 2.0
6 During operation
6.1 Status indications
6.1.1 At the 9371 BB keypad
Status messages on the keypad
Display on off
RDY Ready for operation Initializing or fault
IMP Power outputs inhibited Power outputs enabled
FAIL Active fault (TRIP, fail-QSP, message or warning) No fault
I
MAX
Motor current setpoint
C0022 Motor current setpoint
C0022
M
MAX
Speed controller within its limitation. Drive is torque controlled. Speed controlled drive
To Next Page
Loading...