Lenze i510 - Page 33

Operating instructions i510 cabinet frequency inverter | 33
© 11/2021 · EN · www.Lenze.com
Display code Name
Possible settings/
Value ranges
Keypad code Information
P450.03 Freq. preset 3 0.0 ... 50.0 | 60.0 ... 599.0Hz * Parameterizable frequency setpoints (preset 3).
P450.04 Freq. preset 4 0.0 ... 0.0 ... 599.0Hz Parameterizable frequency setpoints (preset 4).
* Default setting dependent on the model
Favorites (group 0)
Commissioning









Parameter overviewTerminal controlKeypad controlImportant notesInitial switch-on
Extended
terminal control
Keypad module
Additional functions
Basic setting Motor control
Favorites
 