Lenze i510 - Page 39

To Next Page

To Previous Page

Operating instructions i510 cabinet frequency inverter | 39

Error code Description Classication Remedy Blocking time [s]

7180 Motor overcurrent Trouble

• Check motor load.

• Check drive sizing.

• Adapt the set error threshold (P353.01).

9080 Keypad removed Trouble • Connect the keypad again or activate another control source. 0

FF06 Motor overspeed Trouble • Adapt the maximum motor speed (P322.00) and the error threshold (P350.01). 1

FF37 Automatic start disabled Trouble • Deactivate start command and reset error. 0

FF85 Keypad full control active Warning • Press the CTRL key to exit control mode. 0

Error codes

Troubleshooting



















Error codes

LED statusError message

Support

 

Other manuals for Lenze i510