Lenze m550-H-P63 80 Series - Page 56

Template: Dipscks for G50BB145
M4
M1
M6
M3
M5
M2
0
10 50 100
[mm]
How to check the lubricant level:
1.
Remove the control screw at the marked posion.4Venlaon ^ 23
2.
Insert the dipsck through the threaded hole. Observe the posion of the dipsck in the
template!
3.
Carefully pull out the dipsck and determine the lubricant level. The lubricant level must
be within the marked range of the dipsck.
4.
If the lubricant level is too low, top up lubricant unl the lubricant level is in the marked
area of the dipsck. If the loss is greater, determine the cause.
5.
Insert the control screw and ghten it to the specied torque.
Maintenance
Maintenance work
56