Technical data
Rated data
General data
4
l
19
BA 13.0011−EN 1.0
4.4 Rated data
ƒ The most important rated data of the motor are indicated on the nameplate.
– Further technical data can be obtained from the catalogues.
ƒ The indicated torques and weights are guide values for the selection of the
transmission elements and foundations.
ƒ The rated data indicated on the nameplate refer to operation with Lenze servo
inverters of the 9300 and 9400 series at an inverter input voltage (mains voltage) of
400 V.
) Note!
ƒ The motors can also be connected to inverters others than servo inverters of
the 9300 and 9400 series:
– Depending on the modulation and control performance of the inverter it
might be necessary to derate the power if excessive temperatures are
detected (see Tab. 1).
To Next Page
Loading...
