Commissioning and operation
Important notes
7
l
33
BA 13.0011−EN 1.0
7 Commissioning and operation
7.1 Important notes
( Stop!
ƒ Ensure that the drives are disconnected from the power supply when
working on them!
ƒ The drive must only be commissioned by qualified personnel!
ƒ Do not use the drive in rooms exposed to explosion danger!
ƒ Danger of fire! Do not use flammable detergents or solvents to clean the
drive.
ƒ Avoid overheating! Deposits and dirt on the drives impede the necessary
heat dissipation and must be removed frequently.
Ensure that no foreign particles ingress into the motor!
For trial run without output elements, lock the featherkey. Do not deactivate the
protective devices, not even in a trial run.
Check the correct operation of the brake before commissioning motors with brakes.
To Next Page
Loading...
