About this documentation
Document history
1
l
5
BA 13.0011−EN 1.0
1 About this documentation
Contents
ƒ The present operating instructions are intended for safe working on and with the
motors. They contain safety instructions that must be observed.
ƒ All personnel working on and with the motors must have the operating instructions
available during work and observe the information and notes relevant for them.
ƒ The operating instructions must always be complete and in a perfectly readable
state.
If the information and notes provided in this documentation do not meet your
requirements, please refer to the controller and/or gearbox documentation.
I Tip!
Documentation and software updates for further Lenze products can be found
on the Internet in the "Services & Downloads" area under
http://www.Lenze.com
Validity
This documentation is valid for synchronous servo motors:
Type Designation
SDSGSLL
035, 047, 056, 063
Synchronous servo motors
Target group
This documentation is directed at qualified skilled personnel according to IEC 60364.
Qualified skilled personnel are persons who have the required qualifications to carry out
all activities involved in installing, mounting, commissioning, and operating the product.
1.1 Document history
Material no. Version Description
13314243 1.0 07/2009 TD09 First edition of the operating instructions, separate
from three−phase AC motors
To Next Page
Loading...
