9
FUNCTION 4: LAST TARGET MODE
This mode is used to find the distance of the
farthest object when more than one object may be
read. Multiple objects will often return an average
distance. Last Target Mode ensures an accurate
reading on the farthest object.
1st Target Mode is automatically disabled while Last Target Mode is activated.
FUNCTION 5: METER OUTPUT
This mode displays both LOS (Line of Sight) and TBR
ranges in meters, and will disable readings in yards
or feet. TBR is displayed with one decimal place
resolution in large numbers just above the reticle,
LOS is displayed in small numbers above the angle
readout (just below and to the right of the reticle).
To Next Page
Loading...
Need help?
General
