EasyManuals Logo

Leupold RX User Manual

Leupold RX
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
FUNCTION 14: BOW BALLISTIC GROUP
This mode, when activated, works with TBR to provide
the correct ballistic range for arrows. To select, be
sure that TBR is turned off (follow instructions In
Function 13), then select BOW by pressing Set or Power
on RX-II. The range that displays will correspond to the
target. It incorporates three different groups (Group A, B, or C) depending on
the particular arrow drop. You must choose one of the three groups, based
on your bow and arrow selection. Only one group can be selected at a time.
Selecting a new group deactivates all other groups. Most importantly, using
TBR effectively means Practice, Practice, Practice. Anytime you handle a firearm
or bow, you are ultimately responsible for where your projectile ends up.
BOW GROUP DATA
Bow
Group
Initial Arrow Velocity
(feet per second)
Drop from 20 yard pin
at 40 yards (inches)
Typical Bow Description
A Less than 215 30 or more
Older bows shooting aluminum arrows and newer bows set at
draw weights below 50 lb
B 215 to 250 20 to 30 Quality, newer bows shooting carbon arrows at 50-65 lb draw weight
C 250 or more Less than 20 Fast bows with draw weights in excess of 65 lb
20

Other manuals for Leupold RX

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Leupold RX and is the answer not in the manual?

Leupold RX Specifications

General IconGeneral
BrandLeupold
ModelRX
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals