options as you continue to press Mode. These options are HOLD (HOLd), MOA,
and BAS (bAS). One of these modes needs to be selected before moving on
to choosing your ballistic group in Function 15. To select ballistic groups for
archery, TBR needs to be turned off and BOW turned on.
HOLD will display your holdover for that target at that
distance, which is also based upon the ballistic group
and sight-in zero that you will choose in a later
mode. The upper digits display holdover in inches if
feet or yards are the chosen measurement output.
Centimeters will be displayed if meters are chosen
for your measurement output. Your hold will be
shown as “HI 999” or “LO 999”.
MOA Mode will show your minute of angle
adjustment for your target, taking into account
the True Ballistic Range. The upper display will
show MOA adjustment as “UP 999” and “dn 999”.
16
To Next Page
Loading...
Need help?
General
