Specifications
Leuze electronic MLC 520 EX 54
Calculation of the effective protective field height
H
PFE
[mm] = Effective protective field height
H
PFN
[mm] = Nominal protective field height (see table 14.8)
A [mm] = Total height
B [mm] = Additional dimensions for calculation of the effective protective field height (see
table 14.9)
C [mm] = Value for calculating the effective protective field height (see table 14.9)
Table 14.8: Dimensions (nominal protective field height), weight and response time
Table 14.9: Additional dimensions for calculating the effective protective field height
Device type Transmitter and receiver Receiver
Dimensions [mm] Weight [kg] Response time [ms] acc. to resolution
Type
H
PFN
a)
A=H
PFN
+66
b)
14 mm 20 mm 30 mm 40 mm 90 mm
MLC…-600 600 666 0.75 14 12 7 7 3
MLC…-750 750 816 0.90 17 14 8 8 4
MLC…-900 900 966 1.05 20 17 9 9 4
MLC…-1050 1050 1116 1.20 23 19 10 10 4
MLC…-1200 1200 1266 1.35 26 22 12 12 5
MLC…-1350 1350 1416 1.50 30 24 13 13 5
MLC…-1500 1500 1566 1.65 33 26 14 14 6
a) H
PFN
= nominal protective field height = length of the yellow housing part
b) Total height, see figure 14.1
R = resolution B C
20 mm 1.5 mm 18 mm
30 mm 13 mm 17 mm
To Next Page
Loading...
