Leuze GSU12 User Manual

GSU12
Ultrasonic label fork
Leuze electronic GmbH + Co. KG
info@leuze.com
In der Braike 1 73277 Owen Tel.: +49 7021 573-0
We reserve the right to make changes – 2020/03/17 – 50143644
www.leuze.com•

Leuze GSU12 Specifications

General

Brand	Leuze
Model	GSU12
Category	Accessories
Language	English

Summary

Intended Use of Ultrasonic Label Forks

Function and Device Operation

Label Center Position

Describes how to place the label tape on the lower fork with slight tension for accurate gap detection.

Label Run

Explains aligning the label tape with the 'Label center position' marking for optimal performance.

Overview of Operating Structure

Standard Function

Normal sensor operation after switch-on, detecting label gaps with high precision and speed.

Manual Teach Function

Details the process of manual teaching for sensor configuration and can be executed as dynamic teach.

Set Switching Behavior

Configures the output signal to either light switching (gap) or dark switching (label).

LED Indicators and Status

LED Status Descriptions

Explains the meaning of ON LED (green), OUT LED (yellow), and WARN LED (red) during operation.

Dynamic Manual Teach Process

Sensor Setting via Teach Button

Step-by-step guide to perform manual teach using the device's teach button for dynamic calibration.

Adjusting Switching Output Behavior

Light/Dark Switching Configuration

Procedure to set the sensor for light switching (gap detection) or dark switching (label detection).