Levana Mila - Setting Up Your Mila Monitor; Charging and Initial Camera Setup

Setting Up Your Mila Baby Monitor
Charge the Monitor for 7 hours and Plug in the Camera
7 hr
Charged
Charging
TIP: Ensure the camera’s temperature
sensor is unobstructed. When the
camera is placed near a window or air
vent, the accuracy of the temperature
rating may be aected.
IMPORTANT: We recommend placing your camera(s) no more
than 5ft. away from your baby, as audio may not be detected
if placed further. For a safe setup, never mount cameras directly
above the crib or baby. Power cords must be kept at least 3ft.
away from the crib and baby’s reach at all times.