Emergency Response Procedures
3
S023569 A
2020-07-17
11
Initial response
Use these procedures when you do work on this vehicle at an emergency scene
WARNING
Always assume the vehicle is some type of hybrid, electric or alternative
fuelled vehicle until proven otherwise.
1. Identify the vehicle as a High Voltage vehicle.
Identify
2. Isolate the vehicle to prevent any accidental movement that can cause danger to the first
responders or any crash victims.
Follow the instructions on how to immobilise the vehicle.
Immobilise
3. Disable the vehicle. This makes the High Voltage system safe at the scene of the incident.
Disable
Identify
All vehicles manufactured by the LEVC (LEVC) are High Voltage electric vehicles. LEVC
vehicles can be identified as shown below.
To Next Page
Loading...
