9
Switch to PC x by Keyboard Hotkeys
Hit the hotkey according to your current hotkey definition:
Hotkey sequence = Ctrl + Alt + [command key]*
* The factory default hotkey setting is Ctrl + Alt + 1/2/3/4 for PC 1/2/3/4. User can also use
Scroll Lock + Scroll Lock to switch PC.
Start Auto-scan
Double click the KVM Switch utility icon on the desktop screen to evoke the operation menu,
and then select Start Auto-Scan to activate auto-scanning.
Stop Auto-scan
While auto-scanning, right-click the KVM Switch utility icon to evoke the operation menu,
then select Stop Auto-Scan to de-activate auto-scanning. Or you can press any button on
the face-panel to stop Auto-scan.
KVM Switch Utility configuration
Right-click the KVM Switch utility icon and select Settings or double-click the icon to bring
up the configuration dialog box.
Define Hotkey commands
User can specify the command key as you like by typing it in. For example, you can specify
the hotkey for switching to PC 1 as CTRL + ALT + A by typing an A (not case-sensitive) in
the editable field.
Hotkey Sequence = CTRL + ALT + [command key]*
* The command key is user-definable via the configuration dialog box
Except those control keys such as Alt, Ctrl, Shift, CAPS, Tab, Esc and those functions keys
and edit keys, all other keys on the keyboard, including those number keys on the number
pad are all qualified to be used as hotkey command key. In addition to the software KVM
Switching by the operation menu and the user-defined hotkeys, user can always use the
universal hotkey for PC switching – Scroll Lock + Scroll Lock
To Next Page
Loading...
