11a/b/g Wireless Multi-Client Bridge/AP/WDS Version 1.0
44
4.3.2 Wireless 802.11a Configuration
Click on the 11a link under the Wireless menu.
Visibility Status: Select Visible or Invisible. This is the SSID broadcast feature. If
you set this value to Visible, then the clients will be able to find this SSID on a site
survey.
Channel: Select a channel from the drop-down list. The channels available are
based on the country’s regulation. Place a check in the Auto Channel Select box if
you would like the Access Point to select the cleanest channel.
Transmission Rate: Select a transmission rate from the drop-down list. It is
recommended to use the Best (automatic) option.
802.11 Mode: Select 802.11a only. Do not use this option when configured at Ad-
Hoc mode.
Setting ACK_A Timeout: You may specify a time out value, however, it is
recommended to use the default setting: 40
Click on the Save Settings button once you have modified the settings.
4.3.3 Wireless 802.11b Configuration
Click on the 11b link under the Wireless menu.
To Next Page
Loading...