Appendix B - About Wireless LANs
38
Wireless LAN Configuration
To allow Wireless Stations to use the Access Point, the Wireless Stations and the Access
Point must use the same settings, as follows:
On client Wireless Stations, the mode must be set to "Infrastructure".
(The Access Point is always in "Infrastructure" mode.)
Wireless Stations should use the same SSID (ESSID) as the Access
Point they wish to connect to. Alternatively, the SSID can be set to
"any" or null (blank) to allow connection to any Access Point.
The Wireless Stations and the Access Point must use the same set-
tings for Wireless security (Disabled, WEP, WPA-PSK, WPA2-PSK,
WPA 8021.x, WPA2 802.1x, WEP 802.1x)
If Wireless security remains disabled on the Access Point, all sta-
tions must have wireless security disabled.
If Wireless security is enabled on the Access Point, each station
must use the same settings.
To Previous Page
Loading...
