9
SmartStart
Your Decora Smart branded outlet is compatible with
SmartStart
SmartStart enabled products can be added into a Z-Wave network by
scanning the Z-Wave QR Code found on the top of the outlet or the
back of the box with a controller providing SmartStart inclusion.
No further action is required and the SmartStart product will be added
automatically within 10 minutes of being switched on and in the
network vicinity.
The QR Code and DSK is found on
the side of the outlet. If required,
the pin code is underlined on
the label.
This image is an example, please
use the code found on the
product or product packaging.
To Next Page
Loading...
