7. Your LĒVO C will display WARMING UP as it
preheats to your desired temperature, then begin
the selected cycle once the preset temperature has
been reached. During the cycle, the display will
switch between showing the cycle and the
REMAINING TIME and CURRENT TEMPERATURE.
8. Your LĒVO C will display COMPLETE when the
timer is up and your infusion is complete. Note that
you can change time and temperature or manually
end your cycle at any time. To manually end the cycle
press pause followed by ACTIVATE or INFUSE.
9. Now you’re ready to pour or store your infusion.
Allow the infusion to cool before handling.
10. Remove the basin, take o the silicone lid, and
carefully pour your infusion into a container of your
choice. Or, simply keep your infusion fresh in the
LĒVO C basin.
11. Clean your LĒVO C after each use. All removable
items are dishwasher safe.
12. Your LĒVO C will enter standby mode after
ACTIVATE or INFUSE cycle is complete or after 10
minutes of inactivity.
Routine Infusion Instructions
08
To Next Page
Loading...
Need help?
General
