User Interface
Getting Started
1. Plug the power cord into an electrical outlet.
2. Flip the power button on (located on the left hand
side of the base). Moving forward just tap any button
to wake your LĒVO C.
3. Rinse all removable parts with warm, soapy water
and dry before placing back into your LĒVO C (see full
cleaning instructions later in this guide).
4. Place the silicone stirrer in the center cavity inside
the basin.
5. Suspend the Herb Pod inside the basin away from
the lip of the basin. Place the lid on the basin ensuring
the cutout on the lid is aligned with where you have
suspended the Herb Pod.
6. Press ACTIVATE or INFUSE.
7. To toggle between Celsius & Fahrenheit, hold the
temperature + and - buttons for two seconds.
MODE
ACTIVATE INFUSE
TIME TEMP
TIME +_ TEMP +_ START/
PAUSE
05
To Next Page
Loading...
Need help?
General
