Routine Infusion Instructions
1. The LĒVO C should be set on a at surface and stay
put for the remainder of the process.
2. Remove the glass basin from the machine base by
carefully lifting it o the heat plate; then remove the
basin's lid by gently lifting upwards.
3. Place the silicone stirrer in the center cavity inside
the basin (paddle side up).
4. Remove your Herb Pod from the basin and add your
ingredients. Make sure not to pack it too tightly, so
that liquid can freely ow in and out. With the silicone
cap securely on, hang your packed Herb Pod on the
glass basin away from the basin lip. Place the lid on
the basin ensuring the cutout on the lid is aligned
with where you have suspended the Herb Pod.
5. Add up to 33 oz (1 L) of liquid to the basin, or ll the
basin until your herbs are fully submerged, careful not
to overll! (Ensure the liquid reaches the minimum
ll line.)
WHAT’S IN THE BOX?
Silicone
Stirrer
Herb Pod
+ CAP+ LID
Glass Basin
06
To Next Page
Loading...
Need help?
General
