10
EN
Figure 2.3
Figure 2.4
Important Tips
Your humidifier must have the correct level of
water in the base chamber to work properly.
If there is too much water in the base
chamber, the humidifier cannot create mist.
• Only add water to the water tank. The
humidifier will automatically release the
correct amount of water into the base
chamber.
• Avoid moving or shaking the humidifier.
[
Figure 2.3
]
• Before moving the humidifier, turn it o,
unplug it, and remove the water tank.
• If your humidifier doesn’t produce mist
correctly, check the max water line to
see if there is too much water in the
base chamber. Pour out extra water.
[
Figure 2.4
]
Note:
The max water line is
only
for this purpose.
Do not pour water into the base chamber.
To Next Page
Loading...
