- 10 -
Button Controls
Power Button: Turns on and turns o the
tower fan.
Fan Speed Button: Press ‘ ’ to cycle
through the dierent speeds on the fan.
The default fan speed is low when the fan
is first turned on. Press once to switch to
medium speed, press a second time to
switch to high speed, press a third time to
return to low speed.
Timer Button: Press the ‘ ’ to set the
timer anywhere from 1 to 12 hours. Once
you have reached your desired time,
the fan will automatically start the timer
and turn o once the timer has finished
counting down. To exit out of the timer,
press ‘ ’ repeatedly until “--” appears
on the display.
Mode Button: Use ‘ ’ to select a
specialized function for your tower fan.
Please note that you can adjust the fan
speed in all of the following modes using
‘ .’
• Sleep Mode ( ): Simulates an
evening breeze.
- Low Speed: The fan will continue to
run at normal low speed.
- Medium Speed: The fan will run at
medium speed for 30 minutes, then
drop to low speed.
- High Speed: The fan will run at high
speed for 30 minutes, then drops
to medium speed for another 30
minutes, then continue to operate at
low speed.
• Nature Mode ( ): Randomly selects
fan speed to simulate comfortable
outdoor breezes.
(See charts on page 12).
• ECO Mode ( ): On this mode, the
fan will automatically select a fan speed
based on the ambient temperature in
the room.
- Low speed: Ambient temperature is
less than 77°F
- Medium speed: Ambient temperature
is between 77°–85°F
- High speed: Ambient temperature is
above 85°F
NOTE: For added convenience, the same button
controls can be found on the included remote
control.
NOTE:
• Once a timer has been programmed, the time
and temperature will alternate on the display
every 5 seconds.
• To quickly select a time, press and hold the
‘ ’ until the desired time appears on the
display.
Operation
• To add more time while the timer is counting
down, press ‘ .’ The current timer will be
displayed, and then ‘ ’ can be pressed once
more to adjust the timer.