8
GETTING STARTED
1. Remove the top cover from the water
tank and set it aside. Carefully lift the
built-in handle to remove the water tank
from the base.
2. Flip the tank over and twist the water
tank cap counterclockwise to remove it.
[Figure 1.1]
NOTE:
• For best results, fill the water tank with distilled water.
• DO NOT fill the tank with hot water.
• DO NOT add water through the nozzle or mist tube.
3. Fill up the water tank with cold or room
temperature water; it is recommended
to use distilled water for best results
[Figure 1.2]. You can gauge how much
water is in the water tank by looking
through the water tank window
[Figure 1.3]; the maximum capacity of the
water tank is 1.1 gallons (4.5 L).
Figure 1.1
Figure 1.2 Figure 1.3
To Next Page
Loading...
