Levoit LV550HH - Customizable Humidity; Cancel Mist Functions

15
Figure 3.1
ON / OFF DISPLAYW ARML IGHT HUMID ITYT IMER
ii. Customizable Humidity
1. Hold ‘ ’ for two seconds to access the humidity level selection. You will see a
flashing number, indicating that you can now select a humidity level.
2. Use ‘+’ or ‘-’ to select a humidity level anywhere from 30–80% RH. Please note
that the adjustable levels increase and decrease in increments of five. [Figure 3.1]
3. The relative humidity section on the display will flash 5 times before the
programmed humidity level is set. The display will then show the humidity icon
along with the current humidity level, and the humidifier will start to produce
mist until it reaches the programmed level.
4. The humidifier will stop producing mist once it reaches the programmed level.
It will resume operation when the humidity drops below 3% of the programmed
level in order to maintain the humidity in the room.
5. To cancel Customizable Humidity Mode, press ‘ ’.
NOTE:
• When selecting your desired humidity level, you can also press ‘ ’ to confirm your
selection.
• While the humidifier is operating on the Customizable Humidity mode, you can press ‘+’ or ‘-’
to program a dierent humidity level.
• Pressing the mist level controls will cancel the Customizable Humidity Mode.
iii. Cancel Mist Functions: To cancel any mist function while the humidifier is
operating, simply press ‘ ’.