14
The water tank may leak if not placed
properly on the base.
Figure 5.1
Figure 5.2
Figure 5.3
PREVENTING WATER
LEAKS
• Make sure the silicone ring around the
water tank cap is secured at all times.
[Figure 5.1]
• Twist and secure the cap tightly onto
the water tank. [Figure 5.2]
Note: A small gap between the cap
and the tank is normal.
• Before moving the humidifier, remove
the tank from the base and empty any
excess water from the inner chamber.
• Wipe o any excess water on the top
and bottom of the base.
• Do not shake the humidifier or place
it on an inclined surface. Make sure
to place the humidifier on a flat, level
surface. [Figure 5.3]
To Next Page
Loading...
