8
Use the Humidity level button to
program the humidifier to work
toward a set humidity level.
Press the Timer button to set
the timer anywhere from 1
to 12 hours. When you have
selected your desired time,
the display will flash three
times before the time is set. The device
will automatically turn o when the timer
is finished counting down. To cancel or
turn o the timer, keep pressing the Timer
button until the display flashes “--.”
1. Press the Humidity Level button once
to activate this function. Keep pressing
the Humidity Level button to select a
custom humidity level between 40%-
80% RH.
2. Once you have selected your desired
humidity, the display will flash 5 times
confirming your selection.
3. The device will start producing mist and
will automatically stop operating once
the programmed humidity level has
been reached.
4. The device will resume operation when
the relative humidity drops 5% below
the set humidity value.
5. To cancel this function, press the
Humidity level button until the screen
flashes “- -”.
NOTE:
• The programmed humidity level can be
changed at anytime by pressing the Humidity
level button.
• The “Set Humidity” icon will turn on while you
are setting your humidity level and will turn o
once your humidity level has been confirmed.
• Once you have programmed your humidity
level, the display will alternate between
the programmed humidity and the current
humidity level during operation.
To Next Page
Loading...
