11
USING YOUR SMART HUMIDIFIER
1. Plug in the humidifier. The indicators
on the display will light up for 1 second,
then turn o.
2. Press to turn your humidifier on. The
humidifier will start misting.
Note:
Using the VeSync app allows you to control
your smart humidier remotely and access
additional functions and features (see page 10).
Note:
If there is no water in the tank, will
ash 10 times, and the humidier will turn
o. Fill the water tank (see Getting Started,
page 8).
Note:
You can also set the humidier to
automatically stop misting when the room
reaches a specic humidity level (see Auto
Mode, page 12).
Warm Mist
• Press to turn on warm mist. Keep
pressing to increase the heat setting
of the mist, and to turn warm mist
o. [
Figure 3.3
]
• The humidifier may take 15 minutes to
warm up before producing warm mist.
• Caution: Mist may be hot. Do not place
your bare hands, face, or other exposed
skin over the nozzles while using warm
mist. [
Figure 3.4
] Nozzles can reach
temperatures as high as 140ºF / 60ºC.
Figure 3.1
Figure 3.3
Figure 3.4
Figure 3.2
Note:
• Direct the nozzles away from any
furniture, walls, or other objects to
prevent them from getting wet.
• Do not inhale the mist directly from the
nozzles.
3. Press repeatedly to cycle through
mist settings: Low, Medium, and High.
[
Figure 3.1
]
4. Rotate the nozzles to adjust the direction
of the mist. [
Figure 3.2
]
5. Optionally, use the controls or the VeSync
app to turn on warm mist, activate Sleep
Mode, and more (see Controls, page 7).
6. When your room has reached your
preferred humidity level, turn the
humidifier to a lower setting, or turn it o.
A comfortable humidity level is between
40% and 60%.
7. Press to turn your humidifier o.
Low Mist
Medium Mist
High Mist
Heat O
Low Heat
Medium Heat
High Heat
To Next Page
Loading...
