16
Descaling Your Humidifier
1. Remove the water filter and water filter
sponge from the tank. Flip the tank
over and remove the mist channel.
Then, remove the noise silencer and
absorption pad from the base.
2. Fill the tank with 3 US cups / 710 mL of
distilled white vinegar. [
Figure 7.1
]
6. Flip the water tank over. Pinch the tab
and pull out the mist channel. [
Figure 6.4
]
Care and Maintenence (cont.)
Figure 7.1
Figure 7.2
Figure 7.3
Figure 6.5
Figure 6.4
7. Remove the float, noise silencer,
absorption pad, and aroma box from
the base.
8. Rinse all parts (except the outside of
the base) with room temperature water.
[
Figure 6.5
]
To descale the humidifier (remove mineral
buildup):
3. Replace the tank cover and swish the
vinegar around the tank. [
Figure 7.2
]
4. Place the tank on the base and soak for
15–20 minutes. Vinegar will drain into
the base chamber and loosen scale
(mineral buildup) in the tank and in the
base chamber (including the transducer
and float). [
Figure 7.3
]
9. Dry all parts with a cloth. Make sure
all parts are completely dry before
reassembling or storing.
3
c
u
p
s
To Next Page
Loading...
