CARE & MAINTENANCE CONT.
Replacing the Filter
1. Unplug the air purifier and remove the
filter cover. [Figure 3.1]
2. Remove the old filter. [Figure 3.2]
3. Clean any dust or dirt from inside the
housing. [Figure 3.3]
4. Unwrap the new filter and place it into
the housing. Make sure the filter handle
is facing out. [Figure 3.4]
5. Replace the filter cover onto the
housing. [Figure 3.5]
6. Plug in and turn on the air purifier. Press
and hold for 3 seconds to reset it.
Figure 3.3
Figure 3.1
Figure 3.2
Figure 3.4
Figure 3.5
EN
14
To Next Page
Loading...
