Figure 1.1
Figure 1.4
Figure 1.3
Figure 1.2
3. Replace the filter cover by lining up the
cover’s feet with the matching slots on
the bottom of the housing. [Figure 1.3]
4. Push the cover securely closed.
[Figure 1.4]
5. Remove the “ATTENTION” notice that
covers the display on top of the air
purifier.
Getting Started
1. Remove the filter cover. Pull the filter
from the housing. [Figure 1.1]
2. Take the filter out of its plastic
packaging, then reinstall it into the
housing. Make sure the handle on the
filter is facing out. [Figure 1.2]
EN
8
To Next Page
Loading...
