Lexicon PCM NATIVE - The Soft Row; Customizing the Soft Row

13
The Soft Row
When the plug-in is rst instantiated, a number of parameters appear. This page
of parameters is called the “Soft Row”. These parameters were chosen as being
the most useful parameter for a particular preset. In most cases, we’ve tried to
make a consistent set of choices, but many presets call for different parameters.
For most people, the soft row is all that’s needed.
Customizing the Soft Row
The Soft Row assignments are part of the preset. You can change the Soft Row
assignments and store the preset as a User preset. To do this, press the “Edit”
key to go into edit mode and press the button for “Soft Row”. The plug-in will
look something like this:
In the modier button area, just above the fader, you will see the name of the
parameter that is assigned to that position in the soft row. Click on the parameter
and a list of all the algorithm parameters will appear. Select a parameter (or “no
selection”) from the list, and that parameter is assigned to the soft row. The as-
signed parameter is still available on its original edit page, but now it appears in
the soft row as well.
1. Click
Edit
2. Click
Soft Row
3. Modifier
button area.
Click to assign
soft row
parameter.