Lexicon PCM NATIVE - Output Level, Pattern, Predelay, Reflections

47
Output Level
Output Level controls the amount of post-mix signal emitted onto a channel of output.
Pattern (Room)
Selects a space available in the selected Category (see Category parameter).
Predelay
This is used to add a small amount of delay to a signal before it enters the rever-
berator. This is used to create a little separation between the wet and dry signals,
in turn creating greater clarity in the mix. This delay can also be toggled into
Tempo Mode, causing the delay value to be related to the tempo of the music.
Reflection Parameters
Rfl Delay
Controls the delay time of a reection. This can be toggled to Tempo Mode,
in which case its delay time will be related to tempo. Note that this parameter
can have different routing congurations, indicated in its name. For example,
if its name appears as “L R Delay” or “L-L R Delay,” the signal comes in
from the left and goes out the left. If the name appears as “L-R R Delay,” the
signal comes in from the left and goes out the right.
Rfl Gain
Controls the gain of a reection. The sign of the gain coefcient by be option-
ally inverted. Note that this parameter can have different routing congura-
tions, indicated in its name. For example, if its name appears as “L R Gain”
or “L-L R Gain,” the signal comes in from the left and goes out the left. If the
name appears as “L-R R Gain,” the signal comes in from the left and goes
out the right.
Rfl Time Mast
This parameter is used to scale all reection times at once.