Lexicon PCM NATIVE - Tap Slope

53
Tap Slope
This is an unusual parameter which affects the relative gain of impulses coming
from the reverb. While this parameter does not (as it might appear) make the
reverb sound ‘bumpy’, it may affect timbre or the overall sense of spaciousness.
24
Tap Slope = 0
Positive Tap Slope
Negative Tap Slope
Overall Decay trend
Impulses
It can also be used to create inverse and gated effects. In this case, Reverb
Time should be at 0. Spread should be fairly high. Shape should be fairly high.
Size should be fairly high. TapSlope should be in the range of (5 to 10). Play with
spread, shape and size to vary the effect.