Lexicon Prime Time 93 - Page 65

•
Repeat Hold
Delay Bypass
Remote Control Capability
Phase Inversion
Pre-emphasis/De-emphasis
Size
Weight
Power
Protection
Connector Option
64
Repeats signal in delay memory indefinitely with-
out audio degradation,
alternate action with LED
indicator
Bypasses or cuts in delay system; when bypassed
connects Input
Mix to Master Output; switch ac-
tuated with
LED indicator
~~~ phone jacks on rear panel for Repeat Hold foot
switch,
Delay Bypass foot switch, and Delay Adjust
foot pedal pot or 0-10
volt signal
3 switches allow Input,
Delay A and/or Delay£ to
be inverted
75/15
~s; max boost 12dB at 12kHz
Standard 19
11
rack mount, 3 1/2
11
high x 11 1/2
11
deep (483 x 89 x 292 mm)
11 lbs. (5 kg); 15 lbs. shipping
ll5/230V
+10%, switch selectable, (l00/200V
available as option) 50/60Hz, 35 watts max; stan-
dard IEC 3 wire power connector and cord
Mains fused, secondary supplies; fused with over
voltage crowbar and/or
current limited with thermal
protection
Substitution of tip-ring-sleeve ~~~ phone jacks
for all XLR-3 type connectors