Deactivating the Wi‑Fi network
Note: This feature is available only in some printer models.
1 From the printer control panel, navigate to:
Settings >
> Network/Ports > > Network Overview > > Active Adapter > > Standard
Network >
2 Follow the instructions on the display.
Checking the printer connectivity
1 From the control panel, navigate to:
Settings >
> Reports > > Network > > Network Setup Page >
2 Check the first section of the page and confirm that the status is connected.
If the status is not connected, then the LAN drop may be inactive, or the network cable may be unplugged
or malfunctioning. Contact your administrator for assistance.
Printing the Menu Settings Page
1 From the control panel, navigate to:
Settings >
> Reports >
2 Select Menu Settings Page, and then press .
Set up, install, and configure 29
To Next Page
Loading...
