Error codes Error message Solution
31.80 Reinstall missing or
unresponsive fuser.
1 Open door A, and then open
door A1.
CAUTION—HOT
SURFACE: The inside of the
printer might be hot. To reduce
the risk of injury from a hot
component, allow the surface to
cool before touching it.
2 Remove the fuser.
3 Insert the fuser.
4 Close door A1, and then close
door A.
32.40, 32.41, 32.42, 32.43 Replace unsupported [color]
cartridge.
See
“Replacing a toner cartridge” on
page 122.
32.60 Replace unsupported black
imaging unit.
See
“Replacing the black imaging
unit” on page 125.
32.64 Replace unsupported color
imaging kit.
See
“Replacing the color imaging kit”
on page 134.
33.40, 33.41, 33.42, 33.43 Non-Lexmark [color] cartridge, see
User's Guide.
See
“Non‑Lexmark supply” on
page 212.
33.60 Non-Lexmark black imaging unit, see
User's Guide.
33.64 Non-Lexmark color imaging kit, see
User's Guide.
37.1 Insufficient memory to
collate job.
Try one or more of the following:
• To uch Continue to print the part
of the job that is stored and to
begin collating the rest of the print
job.
• Cancel the current print job.
37.3 Insufficient memory, some
held jobs were deleted.
Tou ch Continue to clear the message
and continue printing.
Troubleshoot a problem 167
To Next Page
Loading...
