Lexmark C752 - Understanding Jam Messages; Clearing the Entire Paper Path

Clearing jams guide
Page 2 of 6
Understanding jam messages
Always clear the entire paper path when you receive
any jam message.
Clearing the entire paper path
When a paper jam occurs, the printer stops operating
and displays
2xx Paper Jam and a message to clear
certain printer areas.
After you have cleared the following areas, make sure
all printer covers, doors, and trays are closed, and then
press Go to resume printing.
Area A
1 If you are using the multipurpose feeder, release
the levers on each side of the feeder to open it
flat.
2 Remove any jams and return the feeder to its
working position.
Paper jam message Check Areas... What to do…
200 Paper Jam
(Tray 1)
A, B, T1 Follow the instructions for clearing Area A, Area B, and Area T1.
201 Paper Jam
(Fuser area)
D, K, L Follow the instructions for clearing Area D, Area K, and Area L.
If the jam message persists, paper may be caught in the fuser. See Clearing
fuser jams for instructions.
202 Paper Jam
(Fuser area)
K, L Follow the instructions for clearing Area K and Area L.
If the jam message persists, paper may be caught in the fuser. See Clearing
fuser jams for instructions.
230 Paper Jam
(Duplex area)
E, J Follow the instructions for clearing Area E and Area J.
24<x> Paper Jam
(Trays 2–4)
C, T<x> Follow the instructions for clearing Area C and Area T<x>.
250 Paper Jam
(Multipurpose feeder)
A Follow the instructions for clearing Area A.
27<x> Paper Jam
(Mailbox or output
expander)
M Follow the instructions for Clearing mailbox or output expander jams
(Area M).
28<x> Paper Jam
(Finisher)
1, 2, 3, 4, 5, 6 Follow the instructions for Clearing finisher jams (Areas 1–6).