Connection guide
Page 8 of 14
Verify printer setup
Printing a menu settings page
Print a menu settings page to review the default printer
settings and to verify that printer options are installed
correctly.
Note: For more information about using the
printer operator panel and changing
menu settings, refer to the publications
CD.
1 Make sure the printer is on.
2 Press
Menu until you see Utilities Menu, and then
press
Select.
3 Press
Menu until you see Print Menus, and then
press
Select to print the page.
The message Printing Menus appears on the
display.
4 Verify that the options you installed are correctly
listed under “Installed Features.”
If an option you installed is not listed, turn the
printer off, unplug the power cord, and reinstall
the option.
5 Verify the amount of memory installed is
correctly listed under “Printer Information.”
6 Verify that the paper trays are configured for the
sizes and types of paper you loaded.
Printing a network setup page
If the printer is attached to a network, print a network
setup page to verify the network connection. This page
also provides important information that helps you
configure for network printing.
Note: If an optional MarkNet print server is
installed, you see Print Net1 Setup on
the display.
1 Make sure the printer is on.
2 Press
Menu until you see Utilities Menu, and then
press
Select.
3 Press Menu until you see Print Net Setup, and
then press
Select. The network setup page prints
and the printer returns to Ready status.
4 Check the first section on the network setup
page and confirm that Status is “Connected.”
If Status is “Not Connected,” your LAN drop may
not be active or your network cable may be
malfunctioning. Consult your network support
person for a solution, and then print another
network setup page to verify that you are
connected to your network.
To Next Page
Loading...
