Lexmark CS410 Technical Reference Guide

For more information on PRESCRIBE see the following:
• Kyocera PRESCRIBE Commands COMMAND REFERENCE, version 4.8
• Kyocera PRESCRIBE Commands TECHNICAL REFERENCE, version 4.8
Command explanations
BARC: draw BAR Code
The extent of PRESCRIBE bar code support in version 41G is summarized in the following table. The number specified
is used to select the bar code using the BARC command. Unsupported numbers are ignored.
Bar code type Number Supported
UPC A 0Yes
UPC A with two-digit supplement 1 No
UPC A with five-digit supplement 2 No
UPC D-1 3 No
UPC D-2 4 No
UPC D-3 5 No
UPC D-4 6 No
UPC D-5 7 No
UPC E 8Yes
UPC E with two-digit supplement 9 No
UPC E with five-digit supplement 10 No
EAN-8 11 Yes
EAN-13 12 Yes
DUN-14 (Distribution Unit Number, EAN) 13 No
DUN-16 (Distribution Unit Number, EAN) 14 No
MSI with no check digit 15 No
MSI with single mod-10 check digit 16 No
MSI mod-10 followed by mod-10 check digit 17 No
MSI mod-11 followed by mod-10 check digit 18 No
Code 39 with no check digit (USD-3) 19 Yes
Code 39 with mod-43 check digit (USD-3) 20 Yes
Interleaved two of five (USD-1) with no check digit 21 Yes
Identicon two of five with no checksum 22 Yes
Code 128 (USD-6) “code-b” 23 Yes
Code 128 (USD-6) 24 Yes
PRESCRIBE commands 10

Lexmark CS410 Specifications

General

Print Technology	Color Laser
Print Resolution	1200 x 1200 dpi
Standard Memory	256 MB
Processor Speed	800 MHz
Standard Input Capacity	250 sheets
Connectivity	USB, Ethernet
Supported Operating Systems	Windows, Mac OS, Linux
Monthly Duty Cycle	75, 000 pages
Maximum Memory	2304 MB
Duplex Printing	Yes
Mobile Printing	Yes