3
Open door A1.
4
Open the fuser access door.
5
Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
6
Close and latch the fuser access door.
7
Close door A1, and then close door A.
Paper jam behind door A
1
Open door A.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching
it.
2
Open the isolation unit door.
3
Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
4
Close and latch the isolation unit door.
9
To Next Page
Loading...
