Lexmark CS730 - Clearing Jams in Multipurpose Feeder; Clearing Jams in Standard Bin; Clearing Jams in Door A and Fuser Area

3 Insert the tray.
Paper jam in the multipurpose feeder
1 Remove paper from the multipurpose feeder.
2 Pull out the tray.
3 Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
4 Insert the tray.
Paper jam in the standard bin
Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
Paper jam in door A
Paper jam in the fuser area
1 Open door A.
CAUTION—HOT SURFACE: The inside of the printer
might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching
it.
2 Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
8