Error codes Error message Solution
63 Format the disk. Formatting now wipes all information
from the storage drive.
To format the storage drive later, do
the following:
1 From the home screen, touch
Settings > Device >
Maintenance > Out of Service
Erase.
2 Tou ch Sanitize all information
on hard disk, and then touch
ERASE.
80.01, 80.09 Maintenance kit nearly low. To uch Continue to clear the
message.
80.11, 80.19 Maintenance kit low.
80.21, 80.29 Maintenance kit very low.
80.31 Replace maintenance kit,
recommended life exceeded.
For more information, see
“Ordering
a fuser maintenance kit” on page
127.
82.00, 82.02, 82.09 Waste toner bottle nearly
full.
Tou ch Continue to clear the
message.
82.12, 82.13, 82.19, 82.20, 82.22,
82.23, 82.29
Waste toner bottle almost
full.
82.30, 82.30, 82.33, 82.39, 82.40,
82.42, 82.49
Replace waste toner bottle. For more information, see
“Replacing
the waste toner bottle” on page 150.
84.01, 84.09 Black imaging unit or color
imaging kit nearly low.
Tou ch Continue to clear the
message.
84.11, 84.13, 84.19 Black imaging unit or color
imaging kit low.
Tou ch Continue to clear the
message.
84.21, 84.23, 84.29 Black imaging unit or color
imaging kit very low.
Tou ch Continue to clear the
message.
84.31, 84.33, 84.41, 84.43, 84.48 Replace black imaging unit
or color imaging kit.
• For more information, see
“Replacing the black imaging
unit” on page 131.
• For more information, see
“Replacing the color imaging kit”
on page 140.
88.00, 88.08, 88.09 [Color] cartridge nearly
low.
Tou ch Continue to clear the
message.
88.10, 88.18, 88.19 [Color] cartridge low.
88.20, 88.28, 88.29 [Color] cartridge very low.
88.30, 88.37, 88.38, 88.40, 88.47,
88.48
Replace the [color]
cartridge.
For more information, see
“Replacing
a toner cartridge” on page 128.
Troubleshoot a problem 177
To Next Page
Loading...
Need help?
General
