Paper size
and dimension
500‑sheet
tray
2 x 500‑sheet
tray
2500‑sheet
tray
3000‑sheet
tray
Multipurpose
feeder
3
Two‑sided
printing
Other Envelope
Max:
297 x 427.6 mm
(11.69 x 16.83 in.)
XXXX
X
SRA3
320 x 450 mm
(12.6 x 17.7 in.)
1, 4
XXX
1
Statement
140 x 216 mm
(5.5 x 8.5 in.)
1 1
XX
Universal
90 x 139.7 mm to
320 x 1200 mm
(3.5 x 5.5 in. to
12.6 x 47.24 in.)
XX
5
1
Paper is loaded only in short‑edge orientation.
2
Paper is loaded only in long‑edge orientation.
3
Paper source supports paper size without size sensing.
4
Paper is not supported in tray 1.
5
Two‑sided printing supports Universal sizes between 139.7 x 148 mm to 320 x 458 mm (5.5 x 5.83 in. to 12.6 x 18 in.).
Paper sizes supported by the finisher
Note: When a
finisher
is installed, the standard
finisher
bin becomes the default bin even for print jobs that
do not require
finishing.
Supported paper sizes
Paper size Staple finisher Staple, hole punch
finisher bin 1
Staple, hole punch
finisher bin 2
Booklet finisher
11 x 17
12 x 18
1 1 5
A3
X
1 5
A4
1
Paper is supported but the finisher does not stack, staple, or punch holes in it.
2
Paper is supported only if the finisher stacks and punches holes in it but does not staple it.
3
Paper is supported only if the paper size is 210 x 279.4 mm to 320 x 457.2 mm (8.27 x 11 in. to 12.6 x 18 in.).
4
Paper is supported only if the
finisher
stacks and staples the paper but does not punch holes in it.
5
Paper is supported only if the
finisher
stacks the paper but does not staple or punch holes in it.
6
Paper is supported only for two‑hole punch.
Loading paper and specialty media 36
To Next Page
Loading...
Need help?
General
