E-mail guide
Sending an e‑mail using a shortcut number
1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
• The ADF indicator light comes on when the paper is loaded properly.
2 If you are loading a document into the ADF tray, then adjust the paper guides.
3 Press #, then enter the shortcut number using the keypad, and then press .
4 Press .
Sending an e‑mail using the printer control panel
1 Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.
Notes:
• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF tray. Place these items on the scanner glass.
• The ADF indicator light comes on when the paper is properly loaded.
2 If you are loading a document into the ADF tray, then adjust the paper guides.
3 From the printer control panel, press the up or down arrow button to scroll to Shortcuts, and then press .
4 Press Email Shortcuts > > select the name of the recipient > or .
Note: Shortcuts can be created only from the Embedded Web Server.
E-mail guide
Page 1 of 1
Need help?
General
