Lexmark CX410 - Page 6

2 If the paper is longer than letter‑size paper, then squeeze and then
slide the length guide at the back of the tray to extend it.
2
1
3 Squeeze, and then slide the length guide tab to the correct position
for the size of the paper being loaded.
2
1
1
Note: Use the paper size indicators on the bottom of the tray to
help position the guide.
4 Squeeze, and then slide the width guide tab to the correct position
for the size of the paper being loaded.
2
1
Note: Use the paper size indicators on the bottom of the tray to
help position the guides.
5 Flex the sheets back and forth to loosen them, and then fan them.
Do not fold or crease the paper. Straighten the edges on a level
surface.
6 Load the paper stack with the recommended printable side faceup.
7 Place the paper guides securely against the edges of the paper.
8 Insert the tray.
9 From the printer control panel, set the paper size and paper type
in the Paper menu to match the paper loaded in the tray.
Note: Mixing paper sizes or paper types in a tray may cause
jams.
6