Replace missing waste toner bottle [82.xy]
Install the missing waste toner bottle to clear the message. For more information, see the instruction sheet
that came with the supply.
Replace [type] imaging kit, 0 estimated pages remain [84.xy]
Note: The type can be a black imaging kit, or a black and color imaging kit.
Replace the indicated imaging kit to clear the message and continue printing. For more information, see
the instruction sheet that came with the supply.
Note: If you do not have a replacement imaging kit, then see the “Ordering supplies” section of the
User’s Guide or visit
www.lexmark.com.
Replace unsupported [color] cartridge [32.xy]
Remove the toner cartridge, and then install a supported one to clear the message and continue printing.
For more information, see the instruction sheet that came with the supply.
The following error codes indicate that a non‑genuine Lexmark toner cartridge is installed:
32.13
32.16
32.19
32.22
32.25
32.28
32.31
32.34
32.37
For more information, see
“Using genuine Lexmark parts and supplies” on page 211.
Note: If you do not have a replacement cartridge, then see the “Ordering supplies” section or go to
www.lexmark.com.
Replace unsupported black and color imaging kit [32.xy]
Remove the indicated imaging kit, and then install a supported one to clear the message and continue
printing. For more information, see the instruction sheet that came with the supply.
The following error codes indicate that a non‑genuine Lexmark imaging kit is installed:
32.00
32.01
32.02
32.07
32.08
32.09
32.36
32.37
Troubleshooting 258
To Next Page
Loading...
