Exporting and importing a configuration
You can export
configuration
settings into a text
file,
and then import the
file
to apply the settings to other
printers.
1 Open a Web browser, and then type the printer IP address in the address field.
Note: View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
2 To export or import a configuration for one application, do the following:
a Click Settings > Apps > Apps Management.
b From the list of installed applications, click the name of the application you want to configure.
c Click Configure, and then do either of the following:
• To export a configuration to a file, click Export, and then follow the instructions on the computer
screen to save the configuration file.
Notes:
– When saving the configuration file, you can type a unique file name or use the default name.
– If a "JVM Out of Memory” error occurs, then repeat the export process until the configuration
file
is saved.
• To import a
configuration
from a
file,
click Import, and then browse to the saved
configuration
file
that was exported from a previously configured printer.
Notes:
– Before importing the configuration file, you can choose to preview it first or load it directly.
– If a timeout occurs and a blank screen appears, then refresh the Web browser, and then click
Apply.
3 To export or import a configuration for multiple applications, do the following:
a Click Settings > Import/Export.
b Do either of the following:
• To export a
configuration
file,
click Export Embedded Solutions Settings File, and then follow the
instructions on the computer screen to save the
configuration
file.
• To import a
configuration
file,
do the following:
1 Click Import Embedded Solutions Settings File > Choose File, and then browse to the saved
configuration file that was exported from a previously configured printer.
2 Click Submit.
Setting up and using the home screen applications 26
To Next Page
Loading...
